Heatkeeper Energy Saving Radiator Panels - 30 pack has the following specifications Heatkeeper Insulation Radiator Panels will significantly reduce the heat loss through external walls and directing the heat from your radiators evenly back into the room. This is achieved by creating an air curtain that rises above the radiator minimising the loss of heat energy produced. Up to 70% of the heat from your radiators is heating the wall behind; the aluminized surface reflects the infra-red heat, normally absorbed by the wall behind the heater units, back into the room. The moulded shape of the Heat Reflector also traps air between the heat reflector and the wall surface creating a thermal barrier which reduces conductive heat loss through the exterior wall. Once the Heatkeeper panels are fitted your radiators will start to warm your rooms a lot quicker, the core of your heating unit is hotter, water inside the heating system will return to the boiler at a higher temperature allowing you to reduce the overall boiler water temperature to achieve the same or improved comfort levels. The reduction of the boiler water temperature reduces the amount of fuel required to re-heat the water, and will help you save money. It is estimated that you could reduce your heating bills by approx 20% a year,that could be over £100 for the average house by using Heatkeeper Radiator Insulation Panels. The insulation panels are flexible and robust and easy to fit no specialist tools required - no need to remove radiators - just apply the double-sided tape provided. The HEATKEEPER Energy Saving Radiator Panel is suitable for the height of the most common household radiator and the overall dimensions are 580mm high x 450mm wide x 8mm deep. Panels are most effective where the gap between the wall and the radiator is greater than 20mm, Included in the Kit are full, easy-to-understand fitting instructions and strong, self-adhesive, double-sided tape for secure fitting to the wall behind the radiator.
>>>>> BUY NOW <<<<<
- Heatkeepers' saw tooth patterns cause the warm air to spin out into the room - reducing the time it takes to heat up the room and virtually eliminating cold spots. It also reflects the radiant heat back to the radiator which means that the water circulati
- Heatkeeper panels are suitable for the height of the most common household radiators and the overall dimensions are 580mm high x 450mm wide x 8mm deep. It takes 2-2½ panels to cover a typical radiator. Each pack contains panels instructions and sufficie
Komentar
Posting Komentar